26 lines
1.6 KiB
Markdown
26 lines
1.6 KiB
Markdown
# Activation clip properties
|
|
|
|
Use the Inspector window to change the name of an Activation clip and its **Clip Timing**.
|
|
|
|
|
|
|
|
_Inspector window when selecting an Activation clip in the Timeline window_
|
|
|
|
## Display Name
|
|
|
|
The name of the Activation clip shown in the Timeline window. By default, each Activation clip is named "Active".
|
|
|
|
## Clip Timing properties
|
|
|
|
Use the **Clip Timing** properties to change the position and duration of the Activation clip.
|
|
|
|
Most timing properties are expressed in both seconds (s) and frames (f). When specifying seconds to modify a **Clip Timing** property, all decimal values are accepted. When specifying frames, only integer values are accepted. For example, if you attempt to enter 12.5 in a frames (f) field, it is set to 12 frames.
|
|
|
|
Depending on [the selected Clip Edit mode](clp_about.md), changing the **Start**, **End**, or **Duration** may ripple or replace Activation clips on the same track.
|
|
|
|
|**Property** |**Description** |
|
|
|:---|:---|
|
|
|**Start**|The frame or time (in seconds) when the clip starts.<br />Changing the Start also affects the End. Changing the Start sets the End to the new Start value plus the Duration.|
|
|
|**End**|The frame or time (in seconds) when the clip ends.<br />Changing the End also affects the Start. Changing the End sets the Start to the new End value minus the Duration.|
|
|
|**Duration**|The duration of the clip in frames or seconds.<br />Changing the Duration also affects the End. Changing the Duration sets the End to the Start value plus the new Duration.|
|