Firstborn/Library/PackageCache/com.unity.terrain-tools@4.0.3/Editor/TerrainTools/Compute/Aeolian.compute

//inputs
Texture2D<float>   InHeightMap;
Texture2D<float>   InSediment;
Texture2D<float2>  WindVel;

float4 DomainDim;	     // the dimensions of all of our textures (they must all be the same dimensions)
float4 terrainScale;     // the dimensions in world space of the terrain tile
float4 dxdy;             // (dx, dy, 1 / dx, 1/ dy), where dx, dy = texel width, height

float dt;                          // simulation time step
float SuspensionRate;              // controls the rate at which sediment is removed from the heightfield
float DepositionRate;              // controls the rate at which sediment is deposited back onto the heightfield
float SlopeFactor;                 // exponent value that controls the rate at which slope angles are eroded
float DragCoefficient;             // scalar that controls the rate at which heightfield drag is applied
float ReflectionCoefficient;       // scalar that controls the degree to which the wind velocity "bounces" off surfaces
float AbrasivenessCoefficient;     // controls the rate at which suspended sediment "sandblasts" the heightfield


// output textures
RWTexture2D<float>   OutSediment;
RWTexture2D<float>   OutHeightMap;
RWTexture2D<float2>  OutWindVel;

//
// safety function to ensure we're not going to index off the texture
//
uint4 getSafeNeighbors(uint2 coord) {
	return uint4(
		(coord.x < (uint)(DomainDim[0] - 1)) ? coord.x + 1 : coord.x,  //right index
		(coord.x > 0) ? (uint)(coord.x - 1) : coord.x,                 //left index
		(coord.y < (uint)(DomainDim[1] - 1)) ? coord.y + 1 : coord.y,  //bottom index
		(coord.y > 0) ? (uint)(coord.y - 1) : coord.y                  //top index
		);
}

//helper macros to index the neighbors from the getSafeNeighbors function
#define RIGHT(c)	(c.x)
#define LEFT(c)		(c.y)
#define BOTTOM(c)	(c.z)
#define TOP(c)		(c.w)

//
// computes the gradient of the height field at the specified coordinate
// the gradient vector points in the direction of the steepest ascent
//
float2 computeGradient(uint2 coord) {
	uint4 nidx = getSafeNeighbors(coord);

	float dzdx = ((InHeightMap[uint2(RIGHT(nidx), BOTTOM(nidx))] + 2 * InHeightMap[uint2(RIGHT(nidx), coord.y)] + InHeightMap[uint2(RIGHT(nidx), TOP(nidx))]) -
		(InHeightMap[uint2(LEFT(nidx), BOTTOM(nidx))] + 2 * InHeightMap[uint2(LEFT(nidx), coord.y)] + InHeightMap[uint2(LEFT(nidx), TOP(nidx))])) / 8.0f;

	float dzdy = ((InHeightMap[uint2(LEFT(nidx), TOP(nidx))] + 2 * InHeightMap[uint2(coord.x, TOP(nidx))] + InHeightMap[uint2(RIGHT(nidx), TOP(nidx))]) -
		(InHeightMap[uint2(LEFT(nidx), BOTTOM(nidx))] + 2 * InHeightMap[uint2(coord.x, BOTTOM(nidx))] + InHeightMap[uint2(RIGHT(nidx), BOTTOM(nidx))])) / 8.0f;

	return float2(terrainScale.y * dzdx * dxdy.z, terrainScale.y * dzdy * dxdy.w);
}

//
// Removes sediment from the heightfield, adding them to the OutSediment texture
// more sediment is removed from surfaces whose surface normal is pointing in the opposite direction
// as the wind velocity vector.
//
// Redeposits sediment from the OutSediment texture back onto the heightmap
//
#pragma kernel WindSedimentErode
[numthreads(1,1,1)]
void WindSedimentErode(uint3 id : SV_DispatchThreadID)
{
	float2 grad = normalize(computeGradient(id.xy));
	float mag = length(grad);

	float g_dot_v = max(dot(-grad, normalize(WindVel[id.xy]) * dxdy.zw * mag), 0.0f);

	float pnw = pow(g_dot_v, SlopeFactor);
	float sandBlast = AbrasivenessCoefficient * dt * InSediment[id.xy];
	float windSwept = SuspensionRate * dt;

	float suspendedSediment = min(pnw * (sandBlast + windSwept), InHeightMap[id.xy]);
	float depositedSediment = min(DepositionRate * dt, InSediment[id.xy]);

	float halfHeight = 0.5f * InHeightMap[id.xy];
	float dS = clamp(depositedSediment - suspendedSediment, -halfHeight, halfHeight);

	OutSediment[id.xy] = max(InSediment[id.xy] - dS, 0.0f);
	OutHeightMap[id.xy] = max(InHeightMap[id.xy] + dS, 0.0f);
}

//
// This function applies drag to the wind velocity field based on the gradient vector,
// applying more drag when the surface normal points in the opposite direction as the wind directoin
// There is also a reflection vector applied, causing the wind to "bounce" off of very steep
// terrain features.
//
#pragma kernel ApplyHeightfieldDrag
[numthreads(1, 1, 1)]
void ApplyHeightfieldDrag(uint3 id : SV_DispatchThreadID)
{
	float2 grad = normalize(computeGradient(id.xy));
	float2 scaledVel = normalize(WindVel[id.xy]);

	float g_dot_v = dot(scaledVel, -grad);

	// compute the wind reflection vector
	float2 r = scaledVel - 2.0f * g_dot_v * grad;

	float effectiveReflection = ReflectionCoefficient * dt;
	float effectiveDrag = DragCoefficient * dt * saturate(g_dot_v); // apply more drag to surfaces facing the wind

	OutWindVel[id.xy] = WindVel[id.xy] + effectiveReflection * r - effectiveDrag * WindVel[id.xy];
}